Terms of Service
Effective date: November 19, 2026
These Terms of Service ("Terms") are an agreement between you and the operator of BallooningTool ("BallooningTool", "we", "us"). They govern your use of the website at chefjewelry.com and the drawing ballooning and inspection report tool, accounts and paid plans offered there (together, the "Service"). By using the Service you agree to these Terms. If you do not agree, do not use the Service.
1. What the Service does
BallooningTool lets you open an engineering drawing (PDF or image), place numbered balloons on it, record each characteristic with its requirement and tolerance, enter measured results, and export a ballooned drawing (PDF), an inspection report (Excel, with sheets laid out in the style of AS9102 Forms 1, 2 and 3 and a PPAP-style dimensional results sheet) and a CSV file. The tool runs in your web browser on your own device. Your drawing files, the text read from them, your balloons and your results are not transmitted to or stored on our servers. Our servers provide the website, the tool's software, accounts, credit counting and billing. The Privacy Policy describes exactly what we receive.
2. Eligibility and accounts
You must be at least 18 years old and able to form a binding contract. Opening, ballooning and previewing can be used without an account. Exports, credit packs and plans require an account. An account belongs to the person or business that opened it, who may let its own staff use it; the account holder is responsible for keeping the password confidential and for all activity under the account. Tell us promptly at the support email listed on the Contact page if you believe your account has been accessed without permission.
3. Acceptable use
You agree to use the Service only for lawful purposes and only with drawings you are entitled to use. You are responsible for deciding whether your employer's or your customer's rules (including export-control rules) allow you to open a given drawing in a browser tool. You will not:
- attempt to circumvent credits or payment, including by creating multiple accounts, altering the tool or its requests, or producing export files without a paid credit;
- use stolen or unauthorized payment methods, or open payment disputes for exports you received;
- probe, scan or test the Service for vulnerabilities, except by reporting a problem to the security contact in good faith;
- reverse engineer, scrape, copy or redistribute the software or the website except as permitted by law;
- interfere with the operation or security of the Service, or impose an unreasonable load on it;
- resell access to the Service without our written permission;
- use the Service in violation of any applicable law or regulation.
4. Credits, plans and billing
Free preview. Opening a drawing, placing balloons, completing the table, entering results and previewing the report are free. We may change what the free preview includes at any time.
Credits. Exporting uses one credit per drawing. A credit covers every export of the same drawing file (the ballooned PDF, the Excel report and the CSV, as often as you like) for 7 days from the first export. We recognize the same file by its fingerprint (see the Privacy Policy); a changed file, such as a new revision, is a new drawing. Credits bought in packs do not expire.
Plans. A plan gives a number of credits each month (40 drawings on the Pro plan). Monthly credits that are not used do not roll over; the allowance renews each month, also on yearly billing. Plans renew automatically at the end of each billing period (monthly or yearly) and are charged the price shown when you subscribed, until you cancel. Current prices are on the pricing page; a price change applies only to new subscriptions. Plan credits are used before pack credits.
Payment. Payments are processed by PayPal on their own pages. We do not receive or store your card or bank details. By purchasing you authorise the payment processor you choose to charge you for the pack or plan selected and, for plans, for each renewal until you cancel. An invoice for every payment is available on your account page. Prices are in US dollars. Applicable taxes, if any, are your responsibility unless an invoice states otherwise.
Failed payments. If a renewal payment fails, the payment processor retries it. Plan credits are paused as soon as a renewal payment fails (pack credits you have already paid for remain usable) and come back automatically when a retry goes through; if no payment succeeds, the plan ends. Accounts with an open payment dispute or chargeback are paused until it is resolved.
5. Refunds and cancellation
Because every drawing can be ballooned and previewed free before purchase, purchases are final except as set out in the Refund Policy (unused credit packs within 14 days, duplicate charges, charges after a confirmed cancellation) and where a refund is required by law. You may cancel a plan at any time from your account page. Cancellation stops future renewals; the plan keeps working until the end of the period already paid for.
6. Your data and your responsibility to check
You retain all rights in your drawings and in the files you produce. Because the tool runs on your device, we never possess that data. Values that the tool suggests are read from the text inside a drawing by software and can be wrong, incomplete or attached to the wrong feature; values you type can contain mistakes. The tool marks suggested values until you confirm them and blocks exports while required information is missing, but no automated check catches every error. You are responsible for checking every characteristic, number, tolerance, limit and result against the drawing and your measurements before relying on, submitting or signing any report.
Text read from scanned drawings. When a drawing is a picture (a scan, a photo, or a PDF with no text inside it), the tool can read its characters from the pixels. That reading is done by software in your browser and is less reliable than reading a PDF's own text: digits, decimal points, signs, symbols, tolerances and whole characteristics can be misread, missed, or read where there are none. What is read is offered only as a suggestion, next to a cut-out of the drawing. Nothing is entered into your project unless you accept it, a partly read or uncertain item is either shown to you as a suggestion or left out, and every accepted value stays marked until you compare it with the drawing and mark it as checked. Before the first reading in a project you confirm that you understand this.
Imported measurement reports. When you import a CMM or inspection report, the tool proposes which characteristic each measured value belongs to, from the names and numbers in your file. A proposal can be wrong. Nothing is filled until you confirm the list, and you can change or skip every line. Values are copied as they are written in your file: the tool does not convert units, round, correct or validate them.
However a value got into your project (typed by you, suggested from a PDF's text, read from a scan, or imported from a file), you alone are responsible for its accuracy and completeness and for every drawing, report and file you export, use, sign or send. We are not responsible for any characteristic, number, text or drawing that was read, converted, matched or exported incorrectly or incompletely.
Before every download the tool shows a final check: a preview of the ballooned drawing, a summary of open items and failed results, and a statement that you have checked the files. Downloading confirms that statement. We may suspend accounts that breach this section or Section 3, without refund of credits used in the breach.
7. Not a substitute for your quality requirements
The Service is a tool to help prepare documents. It does not replace your quality system, your inspection procedures, or the requirements of your customer, contract or applicable standard. Report layouts follow the style of commonly used forms; BallooningTool is not certified by, endorsed by or affiliated with SAE International, the IAQG, AIAG or any customer, and no output is certified as compliant with AS9102, PPAP or any other standard. The Service is not engineering, legal or export-control advice.
8. No warranties
THE SERVICE IS PROVIDED "AS IS" AND "AS AVAILABLE" WITHOUT WARRANTIES OF ANY KIND, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, ACCURACY, TITLE AND NON-INFRINGEMENT. WE DO NOT WARRANT THAT THE SERVICE WILL BE UNINTERRUPTED, ERROR-FREE OR SECURE, THAT SUGGESTED VALUES OR REPORTS WILL BE ACCURATE OR COMPLETE, OR THAT ANY REPORT WILL BE ACCEPTED BY ANY CUSTOMER OR AUTHORITY. SOME STATES DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES, SO SOME OF THE ABOVE MAY NOT APPLY TO YOU.
9. Limitation of liability
TO THE FULLEST EXTENT PERMITTED BY LAW, THE OPERATOR OF BALLOONINGTOOL WILL NOT BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY LOSS OF PROFITS, REVENUE, DATA OR GOODWILL, OR FOR ANY COST OF REJECTED, REWORKED, SCRAPPED OR RECALLED PARTS, ARISING OUT OF OR RELATING TO THE SERVICE, HOWEVER CAUSED AND UNDER ANY THEORY OF LIABILITY, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. OUR TOTAL LIABILITY FOR ALL CLAIMS RELATING TO THE SERVICE WILL NOT EXCEED THE AMOUNT YOU PAID US IN THE TWELVE MONTHS BEFORE THE EVENT GIVING RISE TO THE CLAIM, OR ONE HUNDRED US DOLLARS, WHICHEVER IS GREATER. SOME STATES DO NOT ALLOW THESE LIMITATIONS, SO SOME MAY NOT APPLY TO YOU.
10. Indemnity
You agree to indemnify and hold harmless the operator of BallooningTool from claims, damages and expenses, including reasonable attorneys' fees, arising from your breach of these Terms or your use of drawings you were not entitled to use.
11. Termination and closing the Service
You may close your account at any time from the account page. We may suspend or terminate your access if you breach these Terms, if required by law, or if we discontinue the Service. If we terminate a paid plan without cause we refund the unused portion of the current period. If we decide to stop offering the Service altogether, we will give at least 30 days' notice on the website and by email, sell no new credits or plans from that day, cancel all plans no later than the closing date, and refund the unused part of prepaid plan periods (in whole months) and unused pack credits at the price paid. Sections 6 to 10 and 12 survive termination.
12. Changes and governing law
We may change features of the Service and update these Terms; the effective date above changes and material changes are announced on the website or by email. Account holders accept the Terms with a tick box and may be asked to accept again after a material change; we record the date and version accepted. These Terms are governed by the laws of the United States and of the state where the operator of BallooningTool is located, without regard to conflict of law rules; disputes go to the state or federal courts of that state, except that either party may use small claims court where eligible. Before filing a claim, please contact us so we can try to resolve it.